Suse 10 Connection Internet

Here that I set up:
1. Sign yast2 (Yast Control Center)
2. Sign in to Network Devices
3. Sign in to Network Card
4. ">Tap Edit to Lan Card that will connect to the network ->
Edit.
5. When Want to use Static IP Address Static press option Setup
6. Press the button Host Name and Name Server
7. At the same Host Name Server free.
8. In the Name Server with the No. 1 insert that gives the computer IP
Internet Connection Sharing
9. Domain Search my fill 1 mshome.net
10. it

Netsend in linux can use LinPopUp

Netsend in linux can use LinPopUp, condition just smbclient
it should be up ...
Already in the repo, so stay "sudo apt-get install LinPopUp"
byte @ delta: ~ $ sudo apt-cache search LinPopUp
LinPopUp - X Window System port of Winpopup, running over Samba
http://freshmeat.net/projects/linpopup/
"LinPopUp is a GTK port of Winpopup, running over Samba. It permits
communication with a Windows-running computer that runs Winpopup,
sending or receiving messages " GoodLuck yach

An easy way in Linux file sharing with SAMBA

Samba (server message block) is a protocol file sharing and printer sharing to compete with the existing protocols of Novell's IPX-based.SMB is a protocol file sharing and printer sharing Dapa first run on start protocol: TCP / IP, Ne BEUI , IPX / SPX. In other words, the SMB server can replace the position Novell server without having to change the infrastructure of the network will sendiri.Disini author briefly explains the samba server settings in Open Suse 10.0 is langkah2 following it:

1. Make sure that the samba server has been installed.
rpm-qa | grep samba
yast2-samba-server-2.13.9-8
samba-3.0.22-11
samba-client-3.0.22-11
kdebase3-samba-3.5.1-69
samba-vscan-0.3.6b-40
yast2-samba-client-2:13:18-4
samba-doc-3.0.22-16
samba-winbind-3.0.22-11
2. Edit the samba configuration file. If in OpenSuse, the existence of / etc / samba / smb.conf. On the other distributions
should be about / etc / as well.
In the smb.conf file is already there bagian2 configurations, namely with the [Global], [homes],
[printers], etc.

[global]

workgroup = HOME
server string = FSHENDRO
interfaces = 192.168.5.1
bind only = true interfaces
# Printing = cups
# Printcup name = cups
# Printer admin = @ ntadmin, root, administrator
map to guest = Bad User
passwd program = / usr / bin / passwd% u
passwd chat = * password *% n \ n * password *% n \ n * changed *
passwd chat debug = Yes
unix password sync = Yes
logon script = profile.bat
logon path = \ \ N% \ profiles \% u
logon drive = H:
logon home = \ \ N% \% u
domain logons = Yes
domain master = Yes
wins support = Yes

[homes]
comment = Home Directories
valid users =% S
browseable = Yes
read only = No

[share]
comment = share to all users
path = / samba / share
read only = No
writeable = Yes
create mask = 0666
inherit permissions = Yes

[groups]
comment = All groups
path = / home2 /% g
writeable = Yes
inherit permissions = Yes
create mask = 0666

comment = Intaller
path = / samba / source
read only = No
writable = No
inherit permissions = No

# [printers]

# Comment = All Printers

# Path = / var / tmp

# Printable = Yes

# Create mask = 0600

# Browseable = No

# [print $]

# Comment = Printer Drivers

# Path = / var / lib / samba / drivers

# Write list = @ root ntadmin

# Force group = ntadmin

# Create mask = 0664

# Directory mask = 0775

Print process of the Linux computer to Windows

Print process of the Linux computer to Windows computer probably inevitable when migrating an operating system where the position of the system is still a mixture of Linux-based computer with Windows-based computers. There are various ways to print process for this situation, both print via samba and print protocol over TCP-IP.

Based on experience, here's how a "must" succeed in doing print process. Of course both computers are connected using a network system.

regular use LPD protocol instead of Samba to connect from Linux to Windows computers. The trick is as follows:

In Computer Windows, using Windows 2000 and above (direct connection to the printer)

1. Going to Settings | Control Panel | Add-Remove Programs
2. Log in to Windows Components
3. Select Other Network File and Print Services (check)
4. Select Next and so on until it finished the service components installed
5. Enable services to run automatically every time the computer boots by selecting Settings | Control Panel | Administrative Tools | Services
6. Perform printer sharing has been connected. Create a simple connection and easy to remember
7. Check the Windows computer's IP. Can use the Ipconfig command at the command prompt.

On the Linux computer (client)

1. Apply settings and select the LPD printer queue
2. Enter the IP Address your Windows computer and printer share names on the existing settings
3. Test your printer.

Sharing Internet at Ubuntu

Devices that use a server with 2 Network 10/100 Mbps Internet network from the ISP (Speedy), Switch that connects to the LAN and PC Client with each assumed to be 1 LAN card using the PC client 25.

The first step: Determining IP Address Server for Connection to ISP

Data obtained from ISP (Speedy) obtained an IP address such as 125,162,149,201

Subnetnya 255,255,255,254

Acquired ISP's DNS: 202.93.40.174 and 202.152.165.36

ISP Gateway obtained: 125.162.54.1

The second step determines IP Address for Connections Local / LAN

Because the client is assumed to be 25 units then you should select the IP Address 172.16.17.1/27 means Subnetnya is 255,255,255,224

We specify IP Address Server that connects to the LAN we set: 172.16.17.1

Obtained from the ISP's DNS: 202.93.40.174 and 202.152.165.36

The third step determines the Client IP Address:

Client - 1

IP Address: 172.16.17.2

subnet mask: 255,255,255,224

DNS from ISP: 202.93.40.174 and 202.152.165.36

Gateway: 172.16.17.1 (IP address server connected to LAN)

Client - 2

IP Address: 172.16.17.3

subnet mask: 255,255,255,224

DNS from ISP: 202.93.40.174 and 202.152.165.36

Gateway: 172.16.17.1 (IP address server connected to LAN)

The fourth step Setting Internet sharingnya

To make such sharing internet connection from client 1 to client 2

1. In Computer Server

Administration > Network pilih wired connection (eth0) kemudian klik Properties pada Connection Setting isikan seperti berikut ini :" onmouseover="this.style.backgroundColor='#ebeff9'" onmouseout="this.style.backgroundColor='#fff'">Open the network settings: System> Administration> Network select wired connection (eth0) and then click Properties on the Connection Settings insert the following:
Administration > Network pilih wired connection (eth0) kemudian klik Properties pada Connection Setting isikan seperti berikut ini :" onmouseover="this.style.backgroundColor='#ebeff9'" onmouseout="this.style.backgroundColor='#fff'">
Administration > Network pilih wired connection (eth0) kemudian klik Properties pada Connection Setting isikan seperti berikut ini :" onmouseover="this.style.backgroundColor='#ebeff9'" onmouseout="this.style.backgroundColor='#fff'">Configuration: Static IP Address

IP Address: 125,162,149,201

Subnetmask: 255,255,255,254

Gateway: 125.162.54.1

Click OK and then back into the Network Settings control click and add the DNS address from your ISP (202.93.40.174 and 202.152.165.36)

Connect the cable from the ISP to the NIC (eth0) and then open a terminal ping to google in type

ping www.google.com

If no replay is an internet connection is OK

Back to Network Settings window select Wired Connection (eth1) and then click Properties, make the following configuration:

Configuration: Static IP Address

sesuaikan dengan LAN yang kita buat" onmouseover="this.style.backgroundColor='#ebeff9'" onmouseout="this.style.backgroundColor='#fff'">IP address: 172.16.17.1 -> adjust the LAN that we make
sesuaikan dengan LAN yang kita buat" onmouseover="this.style.backgroundColor='#ebeff9'" onmouseout="this.style.backgroundColor='#fff'">
sesuaikan dengan LAN yang kita buat" onmouseover="this.style.backgroundColor='#ebeff9'" onmouseout="this.style.backgroundColor='#fff'">Subnetmask: 255,255,255,224

Gateway address: Clear

Click OK and close the Network Settings window and plug the network cable to the Switch

2. Setting the Client Computer

Setting IP on the client do as much as we do on the server

Client-1

IP: 172.16.17.2

Subnet mask: 255,255,255,224

Gateway: 172.16.17.1 (IP LAN servers)

Client 2

IP: 172.16.17.3

Subnetmask: 255,255,255,224

Gateway: 172.16.17.1 (IP Address Server LAN) ... etc with the same thing for each existing client.

After the settings to try pinging the server, the terminal type ping 172.16.17.1 if reply then the connection is OK.

The next step is sharing the internet, the Ubuntu software tinggall use Firestarter. Kalo is not installed open a terminal typing using apt-get install Firestarter.

Run Firestarter just follow wizzardnya, select the Internet connection from eth0 and eth1 network of local.

Instal printer MP620 or MP630

If you're an MP620 or MP630 owner, you've perhaps struggled a bit to set up the printer part under Linux.

Those 2 models support the Canon MP610 printer driver, but the print parameters require a little "tune up":
They can work only if the "paper switch" option is either set to "Cassette" or "Rear Tray". But never set it to "Paper Feed Switch", or it will just print a blank page ...

Unfortunately, this latest option is the default for MP610, so a MP620 or MP630 newly installed printer requires a manual change to this option in the CUPS printer settings menus.

This is a bit annoying, and ... so easy to fix by tweaking again the PPD file ...
So I uploaded along with the MP600/MP610 PPDs, 2 new PPDs for MP620 and MP630 (in English and French), that simply remove the "Switch" option, and select "Cassette" as default paper source.

Installing this MP620-MP630 PPD will let you use now your printer out of the box without tweaking first the paper select option, and prevents from selecting a wrong paper source when printing.

How to Cleaned HDD?

How to Cleaned HDD from unused file

command from terminal get write --> sudo apt-get clean

How Remove Harddisk Shortcut From Dekstop in Linux

Remove Harddisk Shortcut From Dekstop in Linux :
1. open run (alt+F2)
2. type gconf-editor
3. find apps-->nautilus-->desktop
4. Remove hit from volumes_visible

How can mount ISO images via the loop device

I give tips for You can mount ISO images via the loop device. It is possible to specify transfer functions (for encryption/decryption or other purposes) using loop device.

But how to mount ISO image on Ubuntu? You need to use mount command as follows:

Procedure to mount ISO images on Ubuntu

1) You must login as a root user, if not root user then switch to root user using following command:

$ su -

2) Create the directory mount point:

# mkdir -p /mnt/disk

3) Use mount command as follows (assumes that your ISO file name is disk1.iso):

# mount -o loop disk1.iso /mnt/disk

4) Change directory to list it:

# cd /mnt/disk
# ls -l

Good Luck

How Setting Printer LQ-2180?

1. Download dulu ppdnya
   
2. Open System → Administration → Printing → New Printer, select Gutenprint parallel port #1, Enter device URL : epson:/dev/lp0 → Forward
   

3. Select provide PPD file
   

4. Select file eplq2180.ppd
   

5. Printer Name : LQ-2180 → Apply
   

Install Epson LX-300 Printer at Linux Ubuntu

1. Open System → Administration → Printing → New Printer, in select connection Device chose Gutenprint parallel port #1, chose that for printer epson, so as to Enter device URL emerged epson:/dev/lp0 → clicked Forward
2. To printer driver chose provide PPD file
3. Afterwards the direction would in file Epson-Dot Matrix-epson.ppd
4. Give the name printer LX-300 and clicked Apply
5. The clique in printer LX-300, the Make difference and his Model from Epson the Teat of Matrix Foomatic/epson to Epson the Teat of Matrix Foomatic/eps9mid with clicked the switch change
6. To this time chose driver from “Select Printer from Databese” afterwards chose Epson → Forward
7. In the Models part chose “Dot Matrix” whereas in the Drivers part chose “Epson the Teat of Matrix Foomatic/eps9mid” → Forward
8. Afterwards chose “Use the new PPD (Postscript Printer Description) the USA is” → Forward
9. Driver that just was used by → Apply
10. So that results print better in the Printer Options part the difference resolution to 240x216.dpi. → Apply